When a burner refuses to light or refuses to shut off, you need a person who knows cooktops, not a general handyman. Our dispatchers connect callers around Sequim with independent stove specialists, any hour of the day.
Stove problems look simple from the kitchen and often are not. That is why we route your call to independent pros who spend their days on burners, igniters, switches and glass tops.
The technicians in our network are independent business owners who carry their own licensing and insurance. You are welcome to ask for proof at the door, and a good pro will not blink.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
We hear from people with forty-year-old coil ranges and from people with brand-new induction cooktops. Different machines, same goal: get the burners working and safe again, without paying for guesswork.
Have the model number handy if you can. It usually sits on a sticker under the cooktop lip, inside the storage drawer, or behind the lower kick panel, and it lets the tech pull the right parts list before arrival.
Most stove calls fall into one of these groups. Each one needs different parts and a different test, which is why we ask a few questions before we dispatch.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
A healthy flame is crisp and blue. Yellow tips, lazy flames or flames that lift off the ports point to clogged burner ports, a misaligned burner cap, a dirty orifice or a regulator problem. The pro clears the ports, reseats the cap and head, and checks pressure with a manometer.
When a coil burner stays cold, the culprit is usually the element, the receptacle block it plugs into, or the infinite switch behind the knob. A scorched or melted receptacle has to be replaced along with its wiring terminals, or the new coil will fail too.
Glass ceramic cooktops hide radiant elements and a limiter under the surface. A zone that stays dark, a hot-surface light that never goes out, or a cracked or crazed top all need a pro, and a cracked top should not be used until it is replaced.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
A knob that spins without turning the valve, a valve stem that sticks, or a move from natural gas to propane all land in this group. The tech can swap orifices for the new fuel, adjust the regulator, and fit an anti-tip bracket on slide-in and freestanding units.
This table is not a substitute for a diagnosis, but it helps you describe the problem clearly to our dispatcher.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
The process is short on purpose. You call, a local pro shows up, you see a quote, and the burner gets tested in front of you.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
A local pro heads your way with cooktop parts on board. The dispatcher tells you the arrival window before you hang up.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
The job ends with a real test: each burner on low, medium and high, plus a soap or electronic leak check on gas connections. Ask the pro to put the parts and labor warranty in writing.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Call now and we will look for a local stove pro with an opening.
Our front left burner clicked for two days straight, even with the knob off. The tech found that a pot of pasta water had boiled over into the switch harness. He dried it, replaced one valve switch, and the clicking stopped. The quote was written out before he started.
I own a couple of older rentals and one tenant reported a burner that smelled hot. The technician found a melted receptacle block on the coil range, replaced it with new terminals and a new coil, and showed me the scorched wiring. Glad we caught it.
The induction top flashed a code every time I boiled water. The pro ruled out my cookware, then found a seized cooling fan under the glass. Simple fix once someone actually opened it up.
Our range needed an LP conversion after the move. The technician changed the orifices and regulator setting, then mounted the anti-tip bracket. The flames are blue and steady now.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
A yellow or orange flame means incomplete combustion, which can create soot and carbon monoxide. Common causes are clogged ports, a cap that sits crooked, or the wrong orifice for your fuel. Stop using that burner and have a pro check it.
Cut the power or the gas first. On electric ranges, flip the breaker; on gas ranges, close the shutoff behind the unit. Then call and we will route a pro who can replace the switch or valve that failed.
A crack lets liquid reach live parts, so the glass has to be replaced. The technician quotes the new top in writing, and most models allow the glass to be swapped without replacing the whole range.
Yes, in most cases. The conversion involves new orifices sized for propane, a regulator change, and low-flame adjustments on each valve. Ask the technician to leak-test every fitting when the job is done.
Start with a magnet test on the pan. Aluminum, copper and some stainless pans will not work on induction. If the cookware checks out, a pro can read the error code and test the generator board and fan.
Our referral line covers homes, condos, apartments and rental properties in Sequim and the nearby neighborhoods and suburbs. The independent pros we connect you with drive to you, and most carry common igniters, coil elements and switches on the truck.
Landlords and property managers use the line too, since a dead burner in a rental becomes an urgent tenant call fast. Tell the dispatcher who will be home to let the technician in.
One call to our dispatch line connects you with a local stove pro.
